sales@aquaticstore.com  0121 373 1100

RO Unit – Booster Pump

£59.99

The RO Booster Pump is suitable for any brand of RO Unit . The booster pump negates the affect temperature and water supply pressure have on the RO Unit allowing a significant increase in the volume of water from your unit while also increasing the water quality.

2 in stock

Category:
  • Description

Description

The RO Booster Pump is suitable for any brand of RO Unit . The booster pump negates the affect temperature and water supply pressure have on the RO Unit allowing a significant increase in the volume of water from your unit; and increased pressure also improves the quality of the water through the membrane.

You find generally that RO units will run at about 50% of their stated membrane capacity as the temperature of the water is never 25C as the test is based on and the pressure is never as high as the standard.

By boosting the pressure with one of these units that you tend to get the full stated membrane volume – summer or winter.

These units utilise a transformer to run at low voltage and are suitable for 1/4 inch RO Pipe.

Specifications:

  • Flow Rate (open flow) – 1.2lts/min
  • Pressure – 125 PSI (9 BAR)
  • Voltage – 24V

Suitability

This pump is only suitable for membranes of 50-90 USG due to the flow rate of the pump and depending on the efficiency of the membrane/water temperature. We recommend that the pump is not used with any membrane over 100 USG/day as it will reduce the flow rate to the RO and will reduce the efficiency.

Caution

NEVER DEAD HEAD THE PUMP FOR ANY TIME AGAINST A CLOSED SOLENOID OR CLOSED SHUT OFF VALVE AS THIS WILL DAMAGE THE DIAPHRAGM. IF THIS HAPPENS THEN A NEW HEAD IS AVAILABLE.