0121 373 1100

Gold Label One Shot Pond and Aquarium Sealant


Gold Label One Shot Pond Aquarium Sealer bonds most materials even under water.


No Sealer Gun Required – 75ml

8 in stock

  • Description


Gold Label Pond Aquarium Sealer bonds most materials even under water e.g.

  • Butyl/EPDM
  • Glass
  • Plastic
  • Ceramic
  • Stone
  • Concrete
  • Wood

The Gold Label One Shot product works the same as the Gold Label Pond & Aquarium Sealer, however, the difference is it comes with a trigger nozzle attached (no need to purchase a separate sealer gun). It is smaller in size and therefore suited to smaller tanks/leaks or difficult to reach spaces.

Key Features:

  • Non-Toxic.
  • Solvent Free.
  • Easy to use.
  • For use on glass tanks / aquariums.
  • Shelf life up to 12 months if stored in dry conditions.

Instructions For Use:

For best results clean all surfaces, to be free of Grease, algae.
Place sealer directly onto the surface you wish to bond/seal.
For bonding where there is movement (expansion & Contraction) of different substrates, leave a minimum 2mm thickness of bead between surfaces.
Where there is livestock near the sealer, protect from ingestion while curing.
Full cure 24 hours. Initial tack 2-3 hours. Can be painted over up to 4 hours.

For Clear Gold Sealer, leave a minimum 5mm bead between surfaces. For joining liner, use two beads 150mm apart and leave to cure for 36 hours at ambient temperature and for a patch, run a continuous bead around the edge of the patch and gently press into place. DO NOT PRESS FLAT. Use a 5mm bead for optimum cure and bond strength. Initial cure 24 hours, continuing to harden up to 7 days. For use on concrete, first use a suitable primer.